Skip to main content

etrenerknit.com

Skip to content
Quality control

Knitwear quality control

How quality is checked, and what to agree before bulk

At EtrenerKnit, quality control is part of production: we manage yarn sourcing, knitting, quality control and delivery for every order. This guide explains where quality is decided in knitwear, which defects matter most, and what to agree with your supplier before bulk production starts, so that the finished goods match the sample you approved.

First gate
Sample approval

Signed off before bulk

Your spec
Tolerances

Measurements and finishing

Your standard
Inspection level

Agreed before production

Your option
Third-party check

Planned with the schedule

The chain

Where quality is decided

in knitwear production

In knitwear, quality is built at several points, not only at the end. A garment can fail because of the yarn, the knitting, the assembly, the finishing or the packing, and each stage has its own checks. The list shows what a buyer should expect to be checked at each point.

Yarn

The yarn sets the colour, handfeel and strength of the garment. Checks cover the fibre content, the yarn weight and the colour against your reference, and consistency between lots when an order needs more than one.

Knitting

While panels are knitted, the checks are for dropped stitches, holes, yarn breaks, uneven tension and variation in stitch density, which shows up as panels of different size or feel. Because the fabric is made as the garment is knitted, errors here cannot be fixed later.

Assembly

Where panels are joined, the checks are for seam strength and alignment, twisted or skewed seams, neckline and armhole shape, and the placement of any details. Our production runs on more than 100 Shima Seiki units with an in-house team of 1,000 skilled workers, and where a style is knitted seamless, there are fewer seams to check.

Finishing

Finishing, such as washing or steaming, sets the handfeel and the final size. Checks cover measurements after finishing, shrinkage, shape recovery, surface appearance and loose threads or stains.

Final inspection and packing

Before shipment, finished garments are checked against the approved sample and your specification: measurements, appearance, labels and the packing. See private label knitwear packaging for what to agree on labels, hang tags and cartons.

Preventing problems early

Most quality problems are cheaper to prevent than to fix. A complete tech pack, an approved sample, a named yarn and an agreed inspection level remove most of the ambiguity that later shows up as a dispute. When the specification is clear, the checks at each stage have something concrete to measure against, and any difference between the bulk goods and the approved sample is easy to see and describe.

Sample approval

The sample is the standard

that bulk is judged against

Every custom order starts with a sample, and you approve it before bulk production begins. OEM samples take 10 days and ODM samples take 15–20 days. The approved sample becomes the reference for the whole order, so the time to raise concerns about fit, handfeel, colour or finishing is at this stage.

Review the sample against your tech pack: measure the key points, check the handfeel and drape, look at the colour in daylight, and inspect the finishing at the neckline, hem and cuffs. Send your feedback in one message with photos or marked measurements. For how samples are developed and signed off, read how we develop and approve samples.

Because bulk follows the approved sample, changes after approval can affect timing and cost. If something should change, say so before you sign off.

Defects

Common knitwear defects

and what they look like

Agreeing what counts as a defect avoids disputes later. The table lists the defects buyers meet most often in knitted garments.

DefectWhat it looks likeWhere it is checked
Dropped stitch or holeA run or gap in the fabricKnitting and final inspection
Shade variationVisible colour difference between panels or lotsYarn and assembly
Uneven tensionPanels of different density or sizeKnitting and measurement checks
Out-of-tolerance sizeA measurement outside the agreed rangeAfter finishing and final inspection
Twisted or skewed seamSide seams that spiral toward the front or backAssembly and finishing
PillingSmall balls of fibre on the surfaceYarn choice and testing
Poor recoveryNeckline or cuffs that stay stretchedSample approval and testing
Stains and loose threadsMarks or untrimmed endsFinishing and final inspection
Label or packing errorWrong wording, placement or carton contentFinal inspection
Inspection standard

Agreeing an inspection level

before production starts

Buyers usually define an acceptance quality limit, or AQL, which is the maximum percentage of defective items considered acceptable in a random sample. Inspectors then check a number of pieces from the lot, set by the sampling plan, and compare the defects found with the limits. The sampling method is defined in ISO 2859-1, Sampling procedures for inspection by attributes.

Defects are normally grouped by seriousness: critical defects that make the product unsafe, major defects that make it unsellable and minor defects that are cosmetic. Many buyers set a stricter limit for major defects than for minor ones. There is no single right level, because it depends on your product, your customers and your tolerance for returns.

Tell us the inspection level and the defect classes you expect in your first brief. Agreeing them before production gives both sides the same yardstick when the goods are checked.

Testing

Tests buyers often request

and how to ask for them

Some quality questions are answered by inspection and others need a test. Brands commonly ask about dimensional stability, meaning how much a garment shrinks or stretches after washing, about colourfastness, about pilling and about the accuracy of care labels. Care symbols follow the code in ISO 3758, Textiles: Care labelling code using symbols.

If your brand requires specific tests, name them in your brief, together with the standard or method you want and the pass criteria. We then confirm how they can be arranged for your order and what it means for the schedule. Tests take time, so raising them early avoids delays.

Certificates are separate

Quality control checks your garments against your specification. Certifications are a different subject, because they describe standards for products, materials or sites. Our knitwear certifications and sustainability guide explains the main standards and how to verify them.

Measurement

Measuring knitwear

correctly and consistently

Knitted fabric stretches and relaxes, so how a garment is measured affects the result. Measure on a flat surface, with the garment relaxed and not pulled, and measure after finishing, because washing or steaming changes the final size. Use the same method for the sample and for the bulk goods, or the numbers will not be comparable.

Write the points of measure and the tolerance for each one in your tech pack. A tolerance is the amount by which the finished garment may differ from the stated figure. Without tolerances, there is no agreed rule for deciding whether a garment passes. A clear measurement table with tolerances is part of a complete tech pack.

Handfeel and appearance

Some qualities cannot be measured with a tape, such as softness, drape and the look of the stitch. These are judged against the approved sample, and against a swatch or reference garment if you have one. Keep the approved sample as your physical reference, and describe in your notes what you want to keep, so the same feel is reproduced in bulk.

Protecting the garment in packing

Knitwear can snag and pick up marks, so packing matters. Garments are folded and packed in polybags, and the cartons should protect against crushing and moisture. Agree the packing method before production ends, and check it on the finished goods as well as the garment itself.

Your involvement

Inspection by you

or by a third party

Many buyers add their own check, either by sending a representative or by hiring an independent inspection company. If you plan to do this, tell us in advance so the inspection date fits the production schedule, and so the goods are ready and accessible when the inspector arrives. Share your inspection criteria with us before production, so the same standard is used on both sides.

You can also visit the factory in Guangzhou, by appointment. Read about why brands source knitwear in Guangzhou, or meet the team and see inside the factory.

If you find a problem after delivery

Compare the goods with the approved sample and your written specification. Take clear photos, record the measurements and count how many pieces are affected, then contact us with the details. A precise report, tied to the agreed standard, lets both sides resolve the issue quickly.

Your brief

What to agree

before bulk production

  • A complete tech pack with measurements for every size and tolerances for each point.
  • The approved sample as the reference, with any notes on what to keep or change.
  • The inspection level and the definition of critical, major and minor defects.
  • Any tests you require, with the method and the pass criteria.
  • Label wording, placement and packing details.
  • Whether you or a third party will inspect, and when.

For manufacturing from your own design, read about our OEM knitwear manufacturer service. If your question is not covered here, see answers to common buyer questions.

FAQ

Quality control questions

buyers ask first

When is quality checked in knitwear production?

At several points: the yarn, the knitting, the assembly, the finishing and the final inspection before shipment. The sample you approve before bulk is the reference for all of them.

What is an AQL?

AQL stands for acceptance quality limit, the maximum percentage of defective items considered acceptable in a random sample. Buyers set limits for critical, major and minor defects, and inspectors check a sample of the lot against them.

Can I send my own inspector?

Many buyers do. Tell us in advance so the inspection fits the production schedule, and share your criteria before production so both sides use the same standard.

Can I request specific tests?

Name the tests, the method and the pass criteria in your brief. We confirm how they can be arranged for your order and what they mean for timing.

What if the goods differ from the approved sample?

Document the difference with photos and measurements, compare it with the sample and your written specification, and contact us with the details so we can resolve it.

Do I approve a sample before bulk production?

Yes. OEM samples take 10 days and ODM samples take 15–20 days. You approve the sample before bulk production, which takes 25–35 days after approval.

How do I define critical, major and minor defects?

Critical defects make a product unsafe, major defects make it unsellable or unusable, and minor defects are small cosmetic faults. Write your own examples for each class in your brief, such as a hole in the fabric as major and a loose thread as minor, so inspectors apply the same definitions you do.

How are orders with several styles inspected?

Each style and colour is a separate lot, so it is checked against its own approved sample and specification. State your inspection level once, and we apply it to every style in the order.

Is quality control the same as certification?

No. Quality control checks the garments against your specification. Certifications describe standards for products, materials or sites, and are covered in a separate guide.

Start a project

Tell us your standards

and request a quote

Send your style, quantity, yarn and any inspection or testing requirements. We reply within 24 hours with MOQ, price range and timing. Request a knitwear quote.